- Aug 09, 2018 -
How to solve the black or white on the left or right side of the paper printed by the laser printer? This was discovered two days ago. I thought it was almost no powder, but after checking the toner, I found that it was enough. What caused this problem? Let's take a look at how to solve the blackening of the left or right side of the pattern printed by the laser printer.
The reasons and solutions for this situation are as follows:
1. If the laser beam is scanned outside the normal range, the multi-face mirror can be adjusted to scan the laser beam to the normal range of the drum.
2. If the position of the mirror above the toner cartridge changes, you can adjust the mirror to the correct position.
3. If the toner cartridge fails or there is no toner in the cartridge, you can refill or replace the toner cartridge with a new one.
4, If the toner in the toner cartridge is concentrated on one side of the box, it is advisable to lower the toner cartridge and
shake it to make the toner in the cartridge even gently .
5. Under normal circumstances, use the method shared above to process, and the fault that the left or right side of the printed paper is black can be eliminated.
Editor’s Note: This post was Published by Proffisy on 09 Aug,2018.