- May 23, 2018 -
In the transmission path of the laser printer, if the paper is too thick, rough or smooth, can not move normally, it may pick up carbon powder in the area outside the printed page. If you run these types of media through a manual paper disk or by-pass, you may have better luck. These media usually cross the printer in a more uncomplicated way through a printer to maximize the output quality. If you try to repeat the medium that has already been printed, or you are using cheap paper to print rough draft, please switch to the paper that provides reliable performance.
Editor’s Note: This post was Published by Proffisy on 23 May,2018.