Description of error: The Kyocera Kyocera FS-1800/1801/2200/2201 series printer has an abnormality or irregular operation of personnel. As a result, the data in the main board is in error or the data is initialized, and the error c0180 is reported.
Solution:
Enter maintenance mode and implement U004 (Machine No.) to restore the serial number backed up in the EEPROM.
The operation method is as follows
In the standby mode, press the number key: 10871087 enter the maintenance mode selection to U004
First select the second item "Machine No. (ENG)" Press OK to execute
Then select the third item "Execute" and press OK to execute
Last shutdown to restart the printer back to normal
Note: The first method cannot clear the code. The machine serial number has been changed or the motherboard engine firmware has failed. The printer firmware needs to be updated.
When the power is turned off, an SD card (usually only Kyocera technicians and service personnel have firmware) is inserted into the SD card slot of the machine to update the firmware in the motherboard.
The firmware update is as follows:
Turn off the power, remove the SD card, and then turn on the power, at this time the machine will still report the code c0180, and then repeat the method described at the beginning of the article to eliminate the error code.
Proffisy Related for Compatible For Kyocera TK 1170 Toner
Editor’s Note: This post was Published by Proffisy on 05 Jun,2018.
